numerical calculations
structural calculations
multibody calculations


The ZBR Agro project aimed to build prototypes of slurry tankers with innovative modifications

The ZBR Agro project was aimed at building prototypes of slurry tankers with innovative modifications, especially with an emphasis on reducing the weight of the vehicle by using a thinner sheet metal - a change from 6 to 5 mm and lowering the center of gravity by inserting the wheel arches into the outline of the tank.

The first stage of works included numerical calculations of the models provided by the Employer to ensure sufficient strength and operational safety, including vehicle stability.

The second stage of work covered the tests of prototypes in field conditions using strain gauge measurements, and field tests allowed to verify the previously performed multibody and structural calculations with a positive result.

The prototypes were approved for use and attracted great interest at agricultural fairs as very innovative and safe.

Learn more about cooperation with us

Contact us
+48123972182 info@endego.com
Or let us contact you
  I accept: Privacy policy *

By providing your e-mail address, you consent to receive the newsletter by e-mail with commercial information from Endego for marketing purposes

Read similiar stories

view more
3D printing services
Big news! Among our broad competences and services there is newly added one - 3D printing.
view more
Support in redesign of vacuum valves used in production processes (including screens for televisions and mobile phones)
The task was to support the redesign of vacuum valves used in production processes (including screens for televisions and mobile phones). Our work included...
view more
CdMila – mobile diagnostic application
CdMila is an app for mobile on-board diagnostic (OBD). In current proof-of-concept stage is able to connect with vehicle engine ECU and preview live engine...
view more
Inhouse Laboratory
At Endego, we have our own laboratory where: prototypes of devices are built and tested we take measurements we test PCB boards we solder PCBs benchmarks...
view more
Stairclimber mounted with a wheelchair
The task included product styling, design of the mechanical and electrical part (HW + SW). Multi Body Dynamic analyzes, strength and fatigue calculations...
view more
Development of a front and rear bumper module
We were tasked with the design and engineering of the front and rear bumper modules, including all adjacent parts, such as the grids, slides, handles,...
view more
Wheel lubricator cantilever optimization
The problem we set out to solve, involved the cantilever for a wheel lubricator to undergo strong vibrations, which caused frequent failure. We took a...
view more
Car bodies Jazz Duo and Krakowiak
The project consisted of the mechanical design and supporting documentation, as well as strength investigations, for two tram car bodies, commissioned...