Mobile absorber of kinetic energy when a vehicle hits a stationary or slow-moving truck, used on roads in work zones and during maintenance work
The subject of the project was a TTMA device (mobile absorber of kinetic energy when a vehicle hits a stationary or slow-moving truck, used on roads in work zones and during maintenance work).
SolidWorks software was used for the design work. The numerical model of the TTMA was prepared in Altair HyperMesh. The calculations were carried out in LS-Dyna.
A prototype of the TTMA mobile absorber, meeting the requirements of European standard CEN/TS 16786:2018 for an impact speed of 100 km/h (confirmed by experimental tests).
Trends in energy management, the development of electric and hybrid vehicles, as well as innovations in fleet management and labor optimization are influencing manufacturers and operators of off-highway machinery. The application of modern solutions from these areas can significantly contribute to improving the energy efficiency of the entire off-highway sector.
Read moreDue to its practical as well as aesthetic functions, the ‘grill’ is one of the vehicle components that receive special attention in terms of design. What does this process look like from the initial concept stage through to series production?
Read moreIntroducing a flawless product has always been a goal of all OEMs in the Automotive Industry. Unfortunately, product development has become more complex over the years. A growing number of suppliers involved creates a situation requiring checking if teams provide the correct elements of your final product. The purpose of ASPICE is to assess process steps and give tools to put a rating of your partners’ process development.
Read more
